Supplies
Circular needles or DPNs, size 4
Worsted weight yarn, any color or brand
2 stitch markers
Circular needles or DPNs, size 4
Worsted weight yarn, any color or brand
2 stitch markers
Cable needle
Abbreviations
CB4 (cable 4 back) place 2 stitches on cable needle, hold in back, knit 2, knit
the two from the needle.
CF4 (cable 4 forward) place 2 stitches on cable needle, hold in front, knit 2, knit the two from the needle.
CR3R (Cable 3 Right) place one stitch on cable needle, hold to the back, knit two, purl the stitch from the needle.
CR3L (Cable 3 Left) place 2 stitches on cable needle, hold to the front, purl 1, knit the 2 from the needle.
CR4R (Cable 4 Right) place 2 stitches on cable needle, hold to the back, knit two, purl 2 from the needle.
CR4L (Cable 4 Left) place 2 stitches on cable needle, hold to the front, purl 2, knit 2 from needle.
K1M1 (knit one, make one) knit one stitch and before slipping it off the left needle, insert the right needle into the back of the stitch to draw through second loop.
CF4 (cable 4 forward) place 2 stitches on cable needle, hold in front, knit 2, knit the two from the needle.
CR3R (Cable 3 Right) place one stitch on cable needle, hold to the back, knit two, purl the stitch from the needle.
CR3L (Cable 3 Left) place 2 stitches on cable needle, hold to the front, purl 1, knit the 2 from the needle.
CR4R (Cable 4 Right) place 2 stitches on cable needle, hold to the back, knit two, purl 2 from the needle.
CR4L (Cable 4 Left) place 2 stitches on cable needle, hold to the front, purl 2, knit 2 from needle.
K1M1 (knit one, make one) knit one stitch and before slipping it off the left needle, insert the right needle into the back of the stitch to draw through second loop.
Cast On 48 stitches on circular needles.
Rib stitch x2 for six rows.
Begin cable pattern; repeat the
following panel twice per row:
Celtic Cable Panel
Celtic Cable Panel
R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R11
R12
R13
R14
R15
R16
|
(P2, C4B, P2) x3
P1, CR3R, (CR4L, CR4R) x2, CR3L, P1
CR3R, P1 (P2, C4F, P2) x2, P1, CR3L
K2, P2, (CR4R, CR4L) x2, P2,
K2
(K2, P2) x2, P2, C4B, P2, (P2, K2) x2
K2, P2, (CR4L, CR4R) x2, P2, K2
CR3L, P1 (P2, C4F, P2) x2, P1, CR3R
P1, CR3L, (CR4R, CR4L) x2, CR3R, P1
|
Complete the panel once, then repeat rows 1 through 10.
On row 11, K1M1 x2 after the first 24 stitches to begin
thumb gusset for the left glove. For the right glove, insert gusset increases
after the 48th stitch. Place stitch markers here so you know where they are.
From this point, only do the panel pattern on the back half
of the glove, with a standard knit stitch for the palm.
Continue the panel as before up to row 16, increasing at gusset by K1M1 x
2 every 4th row until you complete the panel for the second time. Repeat rows 1
through 8 again, increasing your gusset each 4th row.
Gusset increases will occur on rows 11, 15, 3, and 7. There
will be 12 gusset stitches total.
Place the gusset stitches on reserve yarn.
Finish the panel pattern from rows 9 through 16, with the
standard knit on the palm and cable pattern on the back. You will have
completed the cable pattern three full times.
Rib x 2 six more rows and bind off.
Place gusset stitches back on the needles and pick up four
more from the index finger side.
Rib x 2 for six rows and bind off.
Weave in ends.
No comments:
Post a Comment